We recommend a competent person plan and carries out this installation. Please check building plans for any underfloor pipes or cables.
To fix the kiosk to the floor for security and stability you have two options
Option 1 -
Place your kiosk in the correct position
Open the bottom rear door
You will see two holes in the bottom of the kiosk, mark up where these are on the ground
Remove the kiosk and drill into the marked holes in the ground (please check there are no underground pipes or cables)
Position the kiosk in place and fix using the correct fixings for the type of material you have drilled into.
Option 2 -
Place your kiosk in the correct position
Purchase brackets as pictured below
Fit the brackets to the kiosk where there are existing holes
Mark and drill into the ground (please check there are no underground pipes or cables)
Position the kiosk in place and fix using the correct fixings for the type of material you have drilled into.
