All Collections
How to install and maintain your Tjekvik Indoor solution
Guides on how to install your kiosk hardware (Terminal), software, IT network and maintain once setup
Hardware
Information on your Tjekvik Indoor kiosk
Steps to install your Tjekvik kioskFollow the 5 instructions to ensure your kiosks are installed correctly
Replace locker springsHow-to replace locker springs and document replacement.
Fixing the kiosk to the floorWe recommend the below if you wish to fix the kiosk to the floor, this must be carried out by a competent person.
No Network To KioskKiosk Has no Network?
No Power To KioskKiosk Not Powered On?
How to manually open individual lockers (on an Indoor kiosk)If your kiosk loses power, or the network is down, you can open a specific locker using these quick steps.
How to restart the Tjekvik kioskRestarting and powering off your Tjekvik Kiosk
Replacement PC unit - How ToPC Replacement in the Kiosk
Replace Lock Mechanism and locker doorIndoor kiosk - Use this guide to replace the lock mechanism and locker door
Tjekvik Indoor Kiosk SpecificationsModel: Tjekvik Indoor
Locker light off (Indoor Kiosk)There may be a quick fix if one of your locker lights is off!
Wrapping your Tjekvik indoor kioskTo add your corporate identity to the Tjekvik kiosk you can design and print decals and wrap the kiosk.
How to replace the Network Extension cable in your Tjekvik Indoor TerminalThis is a quick fix to replace a faulty Network Extension cable and get your kiosk back online.
Advanced IT settingsHow-to setup and connect the Tjekvik service on your dealership network
How to retrieve the TeamViewer credentials from your Indoor kioskIn some cases, the TeamViewer ID and Password are not available to Tjekvik, so you will need to find them on the kiosk.
The alarm in your Tjekvik indoor kioskHow it works, and how to turn it off.
Create a Bootable Windows10 ISO on a USBNeed to install windows 10 on your Kiosk?
How to convert an existing machine to LinuxWindows to Linux
Boot issues after Linux conversionIf your kiosk shows a black screen after converting to Linux, follow the below steps