Skip to main content
Replace Lock Mechanism and locker door

Indoor kiosk - Use this guide to replace the lock mechanism and locker door

Alexey Krasilnykov avatar
Written by Alexey Krasilnykov
Updated over a year ago

To replace the lock mechanism and locker door, follow the steps below.

  1. Power off the kiosk & unplug the power cable

  2. Once powered off, unlock the rear bottom door using the keys provided.

  3. You will see the rear of the lockers, to the left of each locker will be a silver lock mechanism, press down on the screw above it to manually open the locker - please refer to the article here for further information.

  4. Once the locker is opened, you will see a spring bar which if pulled down will release the locker door from it's position - remove the locker door

  5. Within the locker on the right hand side you will see 3 Philips screws this is what is holding the locker mechanism in place - using a right angled Philips screwdriver/ratchet undo these screws.

  6. Once you have removed the screws the lock mechanism will be able to be removed, detach the two cables holding it.

  7. To re-attach the new locker, reverse the steps 6-4

If you have any questions regarding this, please contact [email protected]

Did this answer your question?