Preparation to install your physical Kniggendorf machine
Once the Kniggendorf terminal has been delivered to your dealership please carefully remove all packaging, we would suggest 2 people for this task.
Before installing the system, you must remove the funnel to ensure access to the power and data.
Remove the screws on the left-hand side of the funnel.
Once the screws have been removed, please open the drawer and close it until you feel the funnel flap with your fingertips. Press the flap below the funnel without using force with your fingertips a few millimetres above. Pull the funnel now with your left hand slightly to the left, to dismount the hopper from its anchorage.
Once the funnel is removed you can connect the power and data
Put the power and the data through the backside of the terminal
Bring the data and power through where you have removed the funnel
Remove the plastic cover to have access to connect the power
Connect the power to the adapter at the top right of the terminal
Finally, mount the funnel which you removed in the reverse order.
You are now ready to mount the unit onto the wall or stand and program the machine by following this guide