Indoor - Hardware
Repair and replace parts on your indoor kiosk.
By Alexey and 2 others3 authors19 articles
- Fixing the kiosk to the floorWe recommend the below if you wish to fix the kiosk to the floor, this must be carried out by a competent person.
- How to manually open individual lockers (on an Indoor kiosk)If your kiosk loses power, or the network is down, you can open a specific locker using these quick steps.
- How To Remove the Power Extension CableTo remove the Power extension cable, please follow the below instructions:
- How to replace the Network Extension cable in your Tjekvik Indoor TerminalThis is a quick fix to replace a faulty Network Extension cable and get your kiosk back online.
- How to replace the screen on an Indoor kioskReplacing a touchscreen is an easy task. Here are some instructions if you have any questions.
- How to restart the Tjekvik kioskRestarting and powering off your Tjekvik Kiosk
- Locker light off (Indoor Kiosk)There may be a quick fix if one of your locker lights is off!
- No Network To KioskKiosk Has no Network?
- No Power To KioskKiosk Not Powered On?
- Replace Lock Mechanism and locker doorIndoor kiosk - Use this guide to replace the lock mechanism and locker door
- Replace locker springsHow-to replace locker springs and document replacement.
- Replacement PC unit - How ToReplacing the PC in an indoor kiosk is simple, straightforward, and the easiest way to get your kiosk working again
- Tjekvik Indoor Kiosk SpecificationsModel: Tjekvik Indoor
- Wrapping your Tjekvik indoor kioskTo add your corporate identity to the Tjekvik kiosk you can design and print decals and wrap the kiosk.
- How to replace the Power/Network panelWhen there is a power issue, this is a quick fix to get your kiosk back online.
- How to remove the USB ports from the bottom of your kiosk
- How to replace a rear lock on an Indoor kiosk.Replacing a faulty lock is easy, just follow these instructions.
- How to replace a Restart button (Indoor kiosk)Without removing the Network/Power plate.
- How to replace a Restart button (Indoor kiosk)If you have to remove the Network/Power plate.